Swisson XSR DMX & RDM Opto Splitters / Boosters

SKU: Swisson XSR DMX & RDM Opto Splitters / Boosters
$1,076.48 to $1,829.10 $1,076.48 to $1,829.10 Excl. GST

Usually Ships Same Day if Ordered by 1pm

Details

Details

Swisson XSR DMX & RDM Opto Splitters / Boosters Rack or Box

Available versions 5 Pin Rack Dual 5 Pin Rack 5 Pin Box 3 Pin Rack Dual 3 Pin Rack 3 Pin Box RJ45 Rack (EtherCON) Dual RJ45 Rack (EtherCON) RJ45 Box (EtherCON)

NOTE - Does not ship with a plug fitted Rack With Single Rail Terminals (Installation Model) Rack With Dual Rail Terminals (Installation Model) Box With Terminals (Installation Model) What is RDM? RDM (Remote Device Management) is an extension of the DMX-512 protocol for the monitoring and configuration of DMX-512 equipment. It runs concurrently with the DMX-512 over the same cable, on either 3 or 5 pin XLR cables. DMX addresses, device profiles and other parameters can be set remotely by a RDM capable light controller. Changing the DMX address of a fixture with the ladder is not necessary anymore. Unlike DMX, RDM is a bidirectional protocol. RDM needs a splitter which can handle the bidirectional communication. The Swisson XSR series are reliable DMX and RDM splitters and boosters that process DMX and RDM signals with a high level of reliability for professional applications. The XSR has a specially designed power supply which ensures safe operation even under harsh mains conditions. All ports are individually optically isolated and well protected against transient over voltages. In the "DMX-only" mode all non-DMX data is filtered out and a clean signal without RDM or other protocols is generated. The XSR splitters are "discoverable", and are visible on RDM controllers. This gives the user an better overview of the installation and helps in trouble shooting.

  • High level of reliability
  • Boost DMX & RMD
  • Regenerates DMX & RDM
  • Reduces reflection problems
  • Distributes DMX & RDM
  • Optical isolation on each individual port
  • Connection types: 5-pin and 3-pin XLR models,
  • RJ-45 and Pluggable screw terminals models
  • Housing types: Installation, box, rack and double rack models
  • 5 DMX outputs per universe (10 outputs on the double-rack)
  • Built-in line termination

Optical isolation prevents signal disturbances Isolation between input and outputs as well as full isolation between each output Simplify connections and reduce installation and cable cost Easy detection of disturbances by intelligent DMX protocol supervisor Clean and clear amplification of DMX signals DMX line can be terminated by pressing a button Extend DMX lines infinitely with the splitter Strong Power Supply worldwide 50VAC – 276VAC Input (universes) 1pcs, DMX, XLR 5pin or XLR 3pin Through (universes) 1pcs, DMX, XLR 5pin or XLR 3pin Outputs 5pcs, DMX, XLR 5pin or XLR 3pin Box version, M10 thread for a clamp and a eye bolt for safety line Dimensions Rack LxWxH: 19"x11cmx1Unit, Box: 22cmx11cmx1Unit 2 Year warranty