RF Venue RF PA Extension Kit

RF Venue RF PA Extension Kit — Wireless PA Coverage Without Cables

Extend your PA system wirelessly and reliably using the RF Venue RF PA Extension Kit. This professional solution uses proven analog FM stereo transmission in the UHF 470–506 MHz band to deliver clear audio to remote or hard-to-reach speaker locations—without running long signal lines. Each compact receiver includes onboard delay so coverage zones stay time-aligned with your mains.

Key Benefits

• Fast, cable-free deployment: Add satellite speakers for fills, breakouts, lobbies, green rooms, and more—no long copper runs or network audio required.
• Unlimited coverage points: One dual-channel transmitter can feed any number of RF PA receivers on the same channel.
• Time alignment at the edge: Per-receiver delay (set by distance or milliseconds) keeps speech and music coherent across zones.
• Rock-solid reception: True diversity receiver architecture for stable UHF performance in real-world venues.
• Simple setup & sync: 2.4 GHz one-button Sync pairs receivers to the transmitter’s frequency/channel quickly.
• Tour-ready hardware: Compact receivers with balanced mini-XLR output and an IP54 ingress rating; rack-mount transmitter with front-panel controls.

How It Works

The dual-channel rack transmitter accepts balanced audio (CH1/CH2) and broadcasts over UHF. Compact single-channel receivers mount at each speaker and output balanced line or mic level via mini-XLR. Use the built-in delay on each receiver to align arrivals by distance or time, then lock settings. A 2.4 GHz Sync routine speeds pairing and channel assignment.

What’s Included

• RF PA Transmitter kit: Dual-channel rack transmitter, two ½-wave UHF antennas, AC power cable, two short BNC cables, two panel-mount BNC pass-through connectors.
• RF PA Receiver kit (per receiver): Single-channel receiver, 12 VDC power supply, mini-XLR f (receiver) to XLR m cable, hook-and-loop mount with screws.

Core Specifications

• Transmission: Analog FM stereo over UHF 470–506 MHz (system band).
• Channels: Dual transmit channels; receivers tune to Group/Channel presets.
• Sync: 2.4 GHz transmitter↔receiver frequency/channel Sync.
• Receiver: True diversity, LCD display, balanced mini-XLR output selectable +10 dBu (Line) / −10 dBu (Mic), 12 V DC input, IP54.
• Per-receiver delay: Set by distance (m/ft) or milliseconds (up to 800 ms).
• Transmitter RF power: 10 mW / 50 mW (per local regulations).

Typical Applications

• Conference overflow, campus paging, hospitality and outdoor activations.
• Satellite fills, foyer delays, green room and backstage program feeds.
• Temporary or seasonal multi-point PA where cabling is impractical.

Model Options

• RF-PA-KIT: One transmitter + two receivers.
• RF-PA-8PACK: One transmitter + eight receivers.

Setup & Notes

• Maintain at least 3 m between the transmitter and receivers for best performance.
• Operating environment: −10 °C to +50 °C; follow local RF regulations and licensing where applicable.
• Refer to the User Manual for full frequency tables, controls, and safety information.